2007 Honda Accord
Mileage
212,347
Service Date
6/4/2025
Services Performed
- verified concern with customer, test drove and noticed accelerating it pulls right and when you decelerate it goes left. raised and supported vehicle and found the left upper ball joint loose and both lower control arm bushing torn and loose. also had the rack and pinion drip on me while doing inspection. at this time i recommend a new upper control arm and both lower control arms and a rack and pinion and an alignment.
- BALL JOINT – Remove & Replace -LH Upper
- Changed Motor Oil & Replaced Filter, Added Synthetic Motor Oil, Lube Chassis, Check all Fluid Levels
- BALL JOINT – Remove & Replace – Lower,Both – [Serviced in Steering Knuckle Assembly.]
- raised and supported vehicle and removed the front wheels and separated the knuckle from the lower control arms. removed the left lower control arm hardware and removed the lower control arm. starteed to removed the hardware for the right side and found both bolts siezed to the bushing sleeves and the big bushing spun the rubber out of the control arm so i had to cut the right front control arm out which resulted in 4 hours worth of cutting to get the control arm out. in the process the wheel speed sensor wire separated. got a new sensor but the sensor was corroded in and the attaching support broke so i had to drill out the rest of the sensor. finally was able to get the old rusted suspension out and new suspension in. test drove and verified concern has been correcte.
BEAU J. gave our service a 5 star review on 6/4/2025
